1. Compatible with PCIe I/II/III x 2 interface
2. Compliant with NVMe 1.3
3. Support APST、 ASPM Saving Modes
4. Excellent data transfer speed
5. SMART disk Health Monitoring
6. Support Trim command

1. Compatible with PCIe I/II/III x 2/x 4 interface
2. Compliant with NVMe 1.3
3. Support APST、ASPM、L1.2 Saving Modes
4. Excellent data transfer speed
5. SMART disk Health Monitoring
6. Support Trim command

1. Compatible with PCIe I/II/III x 4 interface
2. Compliant with NVMe 1.2
3. Support APST、 ASPM、L1.2 Saving Modes
4. Excellent data transfer speed
5. SMART disk Health Monitoring

1. Compatible with PCIe I/II/III x 2 interface
2. Compliant with NVMe 1.3
3. Support APST、ASPM、L1.2 Saving Modes
4. Excellent data transfer speed
5. SMART disk Health Monitoring
6. Support Trim command

1.Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface.
2.Compliant with ATA/ATAPI-8 standard command protocol.
3.Designed for Industrial and Embedded application systems.
4.SMART disk Health Monitoring.

1.Compliant with ATA/ATAPI-8 standard command protocol
2.Compliant with JEDEC MO-300 standard
3.Designed for Industrial and Embedded application systems
4.SMART disk Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface.
2. Compliant with CFast form factor.
3. Designed for Industrial and Embedded application systems.
4. SMART disk Health Monitoring.

1. Compliant with ATA/ATAPI-8 standard command protocol.
2. Designed for Industrial and Embedded application systems.
3. Support Static and Dynamic Wear Leveling.
4. SMART disk Health Monitoring.

1. Compliant with ATA/ATAPI-7 standard command protocol
2. Designed for Industrial and Embedded application systems
3. Support Static/Dynamic Wear Leveling function
4. Most Support SMART Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface.
2. Compliant with MO-297 form factor.
3. Designed for Industrial and Embedded application systems.
4. Excellent data transfer speed.
5. SMART disk Health Monitoring.

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface
2. Compliant MSATAmini, MO-300B form factor
3. Designed for Industrial and Embedded application systems
4. SMART disk Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface
2. Compliant with ATA/ATAPI-8 standard command protocol
3. Designed for Industrial and Embedded application systems
4. SMART disk Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface
2. Compliant with ATA/ATAPI-8 standard command protocol
3. Designed for Industrial and Embedded application systems
4. SMART disk Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface
2. Compliant with ATA/ATAPI-8 standard command protocol
3. Designed for Industrial and Embedded application systems
4. SMART disk Health Monitoring

1. Compatible with SATA 1.5Gbps, 3Gbps and 6Gbps interface
2. Compliant with JEDEC MO-276 standard
3. Designed for Industrial and Embedded application systems
4. Excellent data transfer speed
5. SMART disk Health Monitoring

1.Compliant with CompactFlash Specification Version 3.x
2.Support CF-ATA commands
3.Supports PC Card Memory Mode/PC Card IO Mode/True IDE Mode
4.SMART disk Health Monitoring
5.Support Static and Dynamic Wear Leveling function

1.Compliant with CompactFlash Specification Version 3.x, 4.x, 5.x and 6.x
2.Ultra DMA Mode supported up to Mode 4
3.Supports PC Card Memory Mode/PC Card IO Mode/True IDE Mode
4.S.M.A.R.T disk Health Monitoring

1. Compliant with standard SD2.0 / SD3.0 / SD5.0
2. Designed for Industrial and Embedded application systems
3. Supports CPRM and SDMI
4. Write Protect feature using mechanical switch
5. Support SD SPI mode

1. Compliant with standard SD2.0 / SD3.0 / SD5.0
2. Designed for Industrial and Embedded application systems
3. Supports CPRM and SDMI

1. Standard 50-pin 2.5" form factor
2. IDE Interface
4. Compatible with ATA command set
5. SMART disk Health Monitoring
6. Support Static/Dynamic Wear Leveling function

1. IDE Interface
2. Compatible with ATA command set
3. SMART disk Health Monitoring
4. Support up to PIO Mode 4/Multi Word DMA Mode 2/Ultra DMA Mode 7
5. Support Global Wear Leveling function

1.IDE Interface
2.Compatible with ATA command set
3.SMART disk Health Monitoring
4.Support up to PIO Mode 4/Multiword DMA Mode 2/Ultra DMA Mode 7
5.Support Write Protection function
6.Support Global Wear Leveling function

1. Compliant with Standard USB 2.0 Specifications
2. Designed for Industrial and Embedded application systems
3. Excellent data transfer speed
4. Standard 10 pin connector, pitch=2.54mm
5.Hardware protect optional function"

1. Compliant with Standard USB 2.0 Specifications
2. Designed for Industrial and Embedded application systems
3. Excellent data transfer speed
4. Standard 4-Pin connector,Type A